China Inorganic Thermal Insulating Board factory and manufacturers | Rongsheng

Short Description:

norganic Thermal Insulating Board

Description

norganic Thermal Insulating Board

Low thermal conductivity, more energy saving

No shrinkage and small gap after heating

No chalking and no performance

High strength and wide range of use

Convenient, healthy and eco-friendly

Good quality control, high capacity

Get Latest Quotation

Brief Description

Inorganic thermal insulating board series is a new type of refractory insulation material processed by large automatic continuous production line using pure inorganic materials. The working temperature is from 900℃ to 1300℃, and it can be used for the back lining of various industrial furnaces, which is a good choice for the heat insulation of furnaces. The bulk density of 0.3〜0.6 g/cm3 can be produced, which fills the gap in China. At 350 degrees, the thermal conductivity can be controlled within the range of 0.11 〜0.13W/(m.K), and the strength can be controlled within the range of 1-2MPa, and the maximum processing size can be 1*2m.

Advantages

The composition structure has nano-micro porosity, which makes the product have good thermal insulation performance.

The permanent linear change rate after heating does not exceed 0.5% within the specified working temperature, and does not shrink in long-term use. The heating permanent line change rate of ordinary insulation board reaches 2%-3%, and the shrinkage is more than 4 times that of inorganic insulation board.

Completely fiber-free, organic-free, all inorganic materials, no chalking and no performance degradation with long-term.

Compared with ordinary thermal insulation board, it has better cold crushing strength, which is more than 3 times, and also has good strength after burning. It can be used in high temperature for a long time, which is safer and wider range of use.

Specification

A. Regular size: 400 x600mm, thickness 30-80mm.
B. Size can be customized according to customers’ demand.

Classification Model RS-B0.35 RS-B0.55 RS-B0.6
BD,(g/cm3) ≤0.35 ≤0.55 ≤0.6
CCS,(Mpa) ≥0.8 ≥2.0 ≥2.0
TC,400℃(W/m·K) ≤0.105 ≤0.115 ≤0.12
PLC,% ±0.5%

950℃×12h

±0.5%

1050℃×12h

±0.5%

1250℃×12h

Typical Applications

It can be used for back lining insulation of furnaces, including heat treatment furnace and rolling steel heating furnace in metallurgical industry, roller kiln in ceramic industry, decomposition furnace in cement industry, electrolytic tank in electrolytic aluminum industry,
cracking furnace in chemical industry.
A)Backing Plate of Roller Kiln in Ceramic Industry
Application: Ceramic roller kiln wall insulation backing plate, bottom backing insulation.


  • :
  • :
  • :
  • Product Detail

    Product Tags


  • Previous:
  • Next:

  • Write your message here and send it to us